Harvard’s two-layer flat lens puts more light into focus
Researchers at Harvard University in the United States and their collaborators built a flat lens that uses two layers of tiny pillars to suppress unwanted reflections. The prototype concentrated more light near its focus than a single-layer lens across a broad range of infrared wavelengths. Both versions formed similarly sharp spots at the design wavelength.
Science··Evening
Lab tests put focusing efficiency near 90 percent
Researchers at Harvard University and Corning, both in the United States, built two flat lenses on the same glass and tested them under the same conditions. In the peer-reviewed Nature Nanotechnology study, the two-layer version put about 90 percent of the light into its focus at the design wavelength. The single-layer version reached 86 percent. The improvement persisted across a band at least 200 nanometres wide.[1]
Pillar widths tune reflections across the lens
The lower layer consists of tiny titanium dioxide pillars whose widths determine how they steer the light. A uniform coating cannot match all of those different widths equally well. Instead, the team placed a second set of pillars directly above the first and varied their widths independently. At each position, the researchers chose a combination that makes light reflected from different surfaces partly cancel out.[1]
The prototypes formed similarly sharp focal spots
At the design wavelength, both lenses formed comparably sharp spots near the physical limit set by diffraction. The team calculated reflection separately in a computer model of the whole lens. That model put the reflected share at 5.1 percent for one layer and 1.2 percent for two layers.[1]