Germany’s OHB wins contract to build ClearSpace-1 debris-removal mission
Germany’s OHB System has secured a European Space Agency contract worth more than 102 million euros for ClearSpace-1. The company plans to capture the defunct PROBA-1 satellite and guide both spacecraft into a controlled atmospheric re-entry. Launch is planned for 2030. A damaged original target prompted a redesign, leaving the mission to tackle a satellite built without equipment to assist its capture.
Science··Midday
A construction contract signed in Bremen
Germany’s spacecraft builder OHB System has won the European Space Agency (ESA) contract for ClearSpace-1, a mission to demonstrate removal of an inactive satellite from low Earth orbit. The agreement was signed on November 17 at Space Tech Expo, a space technology event in Bremen, Germany. OHB puts its value at more than 102 million euros. The spacecraft target is ESA’s PROBA-1 technology satellite following the end of its operating life.[1], [2]
OHB leads the European industrial team. Its partners include ClearSpace, a company working on orbital servicing, Deimos Engenharia and OHB Sweden. They signed a letter of intent on collaboration at the Bremen event. OHB System chief executive Chiara Pedersoli called the contract a milestone for the company and the European space sector, identifying autonomous capture and controlled removal as the mission’s central challenge.[1]
The target cannot assist its capture
PROBA-1 was built without features to assist a servicing spacecraft in a rendezvous or capture. It is therefore an uncooperative target: the removal mission cannot depend on the satellite helping the approaching vehicle. OHB plans for that vehicle to carry out most of the encounter autonomously. Optical and radio-frequency sensors are intended to establish the target’s orientation, rotation and movement relative to the servicing craft before the approach and capture.[1], [2]
A purpose-built capture mechanism is intended to secure PROBA-1. According to OHB’s mission plan, the two spacecraft then undergo a controlled atmospheric re-entry together and burn up. The demonstration covers the full sequence from approaching an unprepared satellite to its removal, with orbital servicing and active debris removal among the capabilities under development.[1], [2]
Damage to the original target changed the mission
The choice of PROBA-1 followed a redesign. OHB says the original target, the VESPA payload adapter left from a launch, was damaged in a debris collision in 2023. Pre-development finished in March 2025, and the company currently plans launch for 2030. ESA operations director Rolf Densing linked removal of large, nonfunctional objects to orbital sustainability and future policies and regulations. ESA has also pressed companies and governments to avoid creating debris, which can endanger other spacecraft.[1], [2]